<track id="1bap1"></track>
<span id="1bap1"><blockquote id="1bap1"><nav id="1bap1"></nav></blockquote></span>

        <span id="1bap1"><output id="1bap1"></output></span>

        <ol id="1bap1"></ol>
        1. <optgroup id="1bap1"></optgroup>
        2. <acronym id="1bap1"></acronym>
            Home > Products > Straight Line (Jointer) Rip Saw
            Designed For Lumber Straight Modifies Processing, Jointer Modifies Procecessing And Reconditioning

            Features

            • The principle of saw cutting under the wood makes the cutting process more steady and smoothly also safer for operating.
            • The arbor of saw blade and motor is the same arbor body, it makes the steady operating of the machine.
            • There are 8 sets upper press roller, the dense arrangement makes the track feeding steady to achieve accurate effect of processing.
            • The saw arbor is lifting adjustable depends on the thickness of the wood to reduce the crack of cutting.
            • The jointer modifies straight line processing, skill free, guarantee the conjunction, high efficiency, high succeeds rate.
            • The feeding track will insure the straight line of processing surface due to the multi layer of V type lover guide plate.
            • The micro-computer digital control oil feeding system which is developed by our company, can be adjusted the feeding interval second accurately to achieve the perfect oil feeding (digital display). The enclosed illuminate instrument can be used to inspect the bottom oil feeding of the track to avoid damage due to oil lacking extends the life of the machine.
            • To insure the life of the machine, the oil feeding instrument has been developed by our company, it equipped 5 holes of individual oil port, one port one oil tube to insure the oil will arrive at the appointed location. High pressure feeding to avoid blocking of the wood chip.
            • The feeding speed can be non-stop speed adjusted depends on the thickness and hardness of the wood, digital display regarding speed, operate and manage conveniently.
            • The feeding guide plate can be right-left adjusted and locked quickly, the operating is simple and smoothly.
            • The safety switch of the saw blade box door makes the saw blaade can be started only after closing the door to insure the safety to the operator.
            • The front feeding entrance safety plate is made of heat treating steel, it is steady and will prevent the rebound of the wood exactly.
             

            Optional Equipments



            Machine Equipment Code Name of the Item Explanation
            RS-16 equipment
            A
            Press roller auto lifting seat Install the auto lifting motor instead of manual adjusting.
            T
            Table width expand module The left of the saw blade can be set the width of 800mm.
            RS-16& RSN-12
            Equipment
            L
            Line laser rating Equip the line laser rating will project the base line to assist the operating, decrease the lost of wood and raise the working efficiency.
            G
            Long material processing guide plate Equip the long guide plate will decrease the Failure of processing while process the long wood.
            Length of plate: 0.9M - 2.4M.
            R
            Feeding guide plate assist side press roller To assist the wood approach the plate when the wood is fed by operator.
            C
            Process data recorder (micro computer) The machine turn on time, process length and process hour can be accumulated and storage fro convenience of management.
            D
            The saw pit door secure electric lock The door can be opened only when the saw blade has completely stopped.
            I
            The main arbor frequency conversion rpm and digital rpm display Equip with the inverter, the main arbor speed can be adjusted from 2200-4200 rpm. Equip with the function of the main arbor break, the saw blade will stop within 10-15 sec. Depends on the size of the blade and the setting value after turning off the machine.
            RSN-12 equipment
            RSN-100
            120mm short wood processing equipment The upper press roller can be exchanged from 8 sets to 10 sets fro processing shortest wood, 120mm

            RSN-12

             

            RSN-12B / RSN-12C Specification

            Model RSN-12B RSN-12C
            Diameter of saw External diameter Ø255mm~Ø355mm(Ø10〞~Ø14〞),
            hole diameter 50.8mm(Ø2〞)
            Saw kerf 3.2~5.0mm
            Max. process thickness 25mm(10〞), 50mm(12〞),75mm(14〞)
            Max. process width Left of saw blade 250mm, Right of saw blade 500mm
            The shortest process length 200mm
            Revolution of saw arbor 2850 rpm/50Hz, 3450rpm/60Hz
            Feeding speed 3 - 26 m/min
            Saw Motor 7 1/2 HP 10 HP
            Feeding Motor 1 HP
            Table dimension L1750 x W860 x H830mm
            Machine dimension L1950xW1280 xH1350mm
            Machine weight 950Kg 960Kg
            For continuing research and development, our company reserves the rights to modify / change of the machine spec.

            RSN-100

             

            RSN-100 Specification

            Model RSN-100C
            Diameter of saw External diameter Ø255mm~Ø355mm(Ø10〞~Ø14〞),
            hole diameter 50.8mm(Ø2〞)
            Saw kerf 3.2~5.0mm
            Max. process thickness 25mm(10〞), 50mm(12〞),75mm(14〞)
            Max. process width Left of saw blade 250mm, Right of saw blade 500mm
            The shortest process length 100mm
            Revolution of saw arbor 2850 rpm/50Hz, 3450rpm/60Hz
            Feeding speed 3 - 26 m/min
            Saw Motor 10 HP
            Feeding Motor 1 HP
            Table dimension L1750 x W860 x H830mm
            Machine dimension L1950xW1280 xH1350mm
            Machine weight 960Kg
            For continuing research and development, our company reserves the rights to modify / change of the machine spec.

            RS-16

             

            RS-16 / RS-16A / RS-16C Specification

            Model RS-16 RS-16A RS-16C
            Diameter of saw External diameter Ø305mm~Ø455mm(Ø12〞~Ø18〞),
            hole diameter 50.8mm(Ø2〞)
            Saw kerf 3.2~5.0mm
            Max. process thickness 45mm(12〞),70mm(14〞), 95mm(16〞), 120mm(18〞)
            Max. process width Left of saw blade 300mm, Right of saw blade 640mm
            The shortest process length 250mm
            Revolution of saw arbor 2850 rpm/50Hz, 3450rpm/60Hz
            Feeding speed 3 – 22 m/min
            Saw Motor 10 HP 15 HP 20 HP
            Feeding Motor 2 HP
            Table dimension L2000 x W1020 x H850mm
            Machine dimension L2250xW1500 xH1350mm L2250xW1600 xH1350mm
            Machine weight 1750Kg 1800Kg
            For continuing research and development, our company reserves the rights to modify / change of the machine spec.

            RS-21C

             

            RS-21C Specification

            Model RS-21C
            Diameter of saw External diameter Ø355mm~Ø533mm(Ø14〞~Ø21〞),
            hole diameter 50.8mm(Ø2〞)
            Saw kerf 3.2~5.0mm
            Max. process thickness 70mm(14〞), 95mm(16〞), 120mm(18〞), 145mm(20〞), 157mm(21〞)
            Max. process width Left of saw blade 300mm, Right of saw blade 640mm
            The shortest process length 250mm
            Revolution of saw arbor 2850 rpm/50Hz, 3450rpm/60Hz
            Feeding speed 3 – 22 m/min
            Saw Motor 20 HP
            Feeding Motor 2 HP
            Table dimension L2000 x W1020 x H850mm
            Machine dimension L2250xW1600 xH1430mm
            Machine weight 1980Kg
            For continuing research and development, our company reserves the rights to modify / change of the machine spec.

            RS-180

             

            RS-180 Specification

            Model RS-180A
            Diameter of saw External diameter Ø305mm~Ø455mm(Ø12〞~Ø18〞), hole diameter 50.8mm(Ø2〞)
            Saw kerf 3.2~5.0mm
            Max. process thickness 45mm(12〞),70mm(14〞), 95mm(16〞), 120mm(18〞)
            Max. process width Left of saw blade 300mm, Right of saw blade 640mm
            The shortest process length 125mm
            Revolution of saw arbor 2850 rpm/50Hz, 3450rpm/60Hz
            Feeding speed 3 – 22 m/min
            Saw Motor 20 HP
            Feeding Motor 2 HP
            Table dimension L2000 x W1020 x H850mm
            Machine dimension L2250xW1600 xH1350mm
            Machine weight 1800Kg
            For continuing research and development, our company reserves the rights to modify / change of the machine spec.
            国产精品杨幂视频在线 2019精品情侣国产 国产精品500在线观看